Newly installed wall-mounted air conditioning unit above artwork in a living room with a roof lantern

Air conditioning installation

Air conditioning installation in Surrey, from survey to switch-on

A good system badly installed will never perform well. We size every system properly, route pipework neatly, commission it fully and give you a fixed price before any work starts.

Est. 2002 Certified engineers Fixed-price quotes
Free · No obligation

Get your free quote

Tell us what you need and we’ll get back to you, usually within 24 hours.

No obligation Reply within 24 hours Fixed-price quotes

Guide prices

How much does air conditioning installation cost?

These ranges reflect typical supply-and-fit prices for standard installations in the UK. Your exact price depends on your property and is fixed after a free survey.

Installation typeTypical price rangeWhat’s usually included
Single wall-mounted split (2.5–3.5kW)£1,500 – £2,800Indoor + outdoor unit, up to ~5m of pipework, bracket, commissioning
Floor-mounted console£1,800 – £3,200Console unit, outdoor unit, pipework, commissioning
Multi-split, two rooms£3,000 – £5,000Two indoor units on one outdoor unit
Multi-split, three rooms£4,200 – £7,000Three indoor units on one outdoor unit
Single ceiling cassette£2,500 – £4,500Cassette, condensate pump, outdoor unit, commissioning
Ducted system (one floor)£6,000 – £15,000+Concealed unit, ductwork, grilles and controls

Guide figures including VAT for typical installations. Long pipe runs, scaffolding, electrical upgrades or difficult access add to the cost.

Price factors

What affects the cost of installing air conditioning?

System capacity (kW)

Bigger rooms, more glazing and south-facing aspects need more cooling power, which means larger, pricier units.

Pipe run length

Standard prices assume a short run. Routing pipework around a house or up several floors adds materials and time.

Wall construction

Solid stone, thick period walls and timber frames need different drilling methods and fixings.

Electrical supply

Most systems need a dedicated circuit from your consumer unit; older boards may need upgrading first.

Outdoor unit position

Ground-level pads are simplest. High brackets, flat roofs or scaffolding add access costs.

Condensate drainage

Where water can’t drain by gravity, a discreet condensate pump is fitted to carry it away.

Our process

The air conditioning installation process, step by step

Free survey

We measure rooms, check the electrics and agree the best positions for indoor and outdoor units.

Fixed written quote

An itemised price with no hidden extras, plus the model, capacity and efficiency ratings.

Installation day

Units mounted, a core hole drilled, pipework, cable and drain connected and neatly finished.

Pressure test & vacuum

The refrigerant circuit is nitrogen pressure-tested and evacuated before the system is charged.

Commission & handover

We test cooling and heating, show you the controls and register the manufacturer’s warranty.

Engineers installing two air conditioning outdoor units on the side of a building using ladders

Timescales

How long does air conditioning installation take?

For most homes, less time than people expect:

  • Single wall-mounted or floor unit: usually one day, often finished by mid-afternoon.
  • Two or three-room multi-split: typically one to two days.
  • Ceiling cassettes: one to two days per area, depending on ceiling access.
  • Ducted systems: scheduled alongside your builder — first fix during construction, second fix before decorating.

Lead times for equipment are normally short, and we’ll give you a confirmed installation date when you accept your quote.

Planning the layout

Where should indoor and outdoor units go?

Good positioning is the difference between a system that quietly does its job and one that’s noisy, draughty or inefficient.

Indoor units

Wall units work best high on a wall with a clear path for air across the room — not blowing straight onto a bed, desk or sofa. Allow space above for airflow and access for filter cleaning.

Outdoor units

Condensers need free airflow, a firm level base or bracket, and access for servicing. We avoid placing them beneath bedroom windows, next to a neighbour’s patio or in enclosed spaces where hot air recirculates.

Pipe routes

We keep pipe runs short and tidy, using colour-matched trunking outside and, where possible, back-to-back installations so almost nothing shows. Our photos of what to look for in an installer explain why neat pipework matters for performance as well as appearance.

Planning and permissions

Listed buildings, conservation areas and flats can need consent. We flag this at the survey stage so there are no surprises.

What we install

Air conditioning systems we install across Surrey

Installation FAQs

Before you book an installation

How big is the hole in the wall?

A single core hole of around 65mm diameter per indoor unit, sleeved and sealed after the pipework is fitted.

Do I need to be home on installation day?

Someone needs to let us in at the start and be available at the end for the handover and controls demonstration.

What warranty do I get?

Manufacturer warranties typically run for several years when the system is installed and registered by a qualified installer and serviced annually. We register the warranty for you and explain the terms.

Can you install in winter?

Yes — winter and spring are ideal, as installation diaries are quieter and your system is ready for the first warm spell. It will also heat your rooms in the meantime.

Get in touch

Get a fixed price for your installation

Tell us about the rooms you want to cool or heat and we’ll arrange your free survey.

Call nowFree quote